All-Purpose Advanced Fast-Curing Silicone Sealant

Product Introduction

Al-Purpose Premium fast-Curing sicone sealan represents a breakthrough in nex-generation slicone sealing technology,engineered for profesional users demanding botheficiency and performance. Building upon traditional fastcuring adhesives,this product delivers a comprehensive upgrade-enhancing application sped without compromisingtop-tier sealing capabilities. ldeal for emergency repairs, large-scale projects, and premium home renovations.

Main components
Polysiloxane,Fillers,Crosslinking Agent,Catalyst,Adhesion Promoter,Other Additives

Product Features
Fast Curing:

Dries faster than ordinary silicone sealants, reducing construction waiting time.Surface dry time: Significantly shorter than standard products.

Aging Resistance:

Maintains elasticity over time, extending service life.Withstands prolonged UV exposure, temperature fluctuations, and weathering

Broad Substrate Compatibility:

Bonds to glass, aluminum, ceramics, concrete, stone, plastics, and more.No priming required for most materials, ensuring versatile applications.

Dynamic Displacement Capability:

Accommodates joint movement up to ±35% (varies by product grade).ldeal for curtain wall expansion joints and other dynamic structures.

Non-Shrinking & Crack-Free:
Ensures dimensional stability after curing, preventing sealant failure.Minimizes risk of water infiltration or air leakage.

Applications
Interior Decoration:
The preferred choice for high-end sliding door installations.

Curtain Wall installation:
Glass curtain walls, stone veneer walls, aluminum composite panels, and insulatedcomposite panels.
Sunrooms:

ldeal for sunrooms and skylight roofs.

Usage Guide
1.Shielding Protection:

Use masking tape to cover both sides of the joint to prevent adhesive fromcontaminating non-bonding areas(remove after curing).

2.Adhesive Tube Opening and Loading:

① Cut the nozzle of the adhesive tube at a 45° angle, adjusting the apertureaccording to the joint width (typically 1/2 of the joint width).

② Load into the caulking gun and expel the unevenly mixed adhesive at thefront end (approximately 5-10 cm).
3.Gluing Techniques:

① Continuous Gluing: Move the caulking gun at a uniform speed toensure the adhesive strip is full without breakpoints.

② Filling Depth: The joint filling should be ≥75% (full filling required forstructural bonding),with an adhesive thickness of 6-12 mm recom-mended.

③ Cross-Section Shape: Adopt a "triangular" or "concave" cross-section(avoid flat surfaces) to facilitate stress dispersion.

4.Trimming and Compaction:
① Use a scraper dipped in soapy water to level the adhesive surface,remove air bubbles, and compact the adhesive (improving density).

②Remove the masking tape immediately after trimming (to avoidadhesion after the adhesive is semi-cured).
Packaging & Storage
Packaging Specifications: 300ml per bottle、590ml per cartridge Customization supported

Storage Conditions: Store at 5°C-25°C (avoid extreme high or low tempera-tures)
Shelf Life: 12-18 months

Key Technical Specifications  Production Standard :JC936-2004

(This product manual is for reference only. The specific performance shall be subject to the actual test report.)For MSDS (lMaterial Safety Data Sheet) or customized technical solutions, please contact our technical personnel.