Fast-Curing Adhesive for Large Aquarium Glass Panels

Product Introduction

AF-7132 High-Strength fastCuring Sealantis specificaly engineered for lare aquarums, acnylic fishtank, and glas landscape priects, Utiizing modified silane poimer technolo.qy.it features uitra-strong adhesion, rapid curing, and waterproofng capabiities, with the abity o withstand lona term water pressure. t senes as the idealbonding materialforaquatic landscaping, oceanariums, and large-scale glass structures.

Main components
Polysiloxane,Fillers,Crosslinking Agent,Catalyst,Adhesion Promoter,Other Additives

Product Features
Permanent Elastic Sealing:
Non-shrinking, crack-free.
Non-Toxic & Odorless:
Environmentally safe, harmless to fish.
High Cured Hardness:
Resists water pressure and impact.
Rapid Full Curing:
Significantly shortens construction cycles
Salt Spray & Seawater Corrosion Resistance:

Suitable for saltwater aquariums.

Applications
Aquarium industry:

Bonding joints for large glass fish tanks, acrylic aquarium splicing.

Oceanarium Engineering:
Glass curtain walls, stone veneer walls, aluminum composite panels, and insulatedcomposite panels.
.ndustrial Sector:
Emergency repair of large glass curtain walls, underwater equipment sealing.

Usage Guide
1.Shielding Protection:

Use masking tape to cover both sides of the joint to prevent adhesive fromcontaminating non-bonding areas(remove after curing).

2.Adhesive Tube Opening and Loading:

① Cut the nozzle of the adhesive tube at a 45° angle, adjusting the apertureaccording to the joint width (typically 1/2 of the joint width).

② Load into the caulking gun and expel the unevenly mixed adhesive at thefront end (approximately 5-10 cm).
3.Gluing Techniques:

① Continuous Gluing: Move the caulking gun at a uniform speed toensure the adhesive strip is full without breakpoints.

② Filling Depth: The joint filling should be ≥75% (full filling required forstructural bonding),with an adhesive thickness of 6-12 mm recom-mended.

③ Cross-Section Shape: Adopt a "triangular" or "concave" cross-section(avoid flat surfaces) to facilitate stress dispersion.

4.Trimming and Compaction:
① Use a scraper dipped in soapy water to level the adhesive surface,remove air bubbles, and compact the adhesive (improving density).

②Remove the masking tape immediately after trimming (to avoidadhesion after the adhesive is semi-cured).
Packaging & Storage
Packaging Specifications: 300ml per bottle、590ml per cartridge Customization supported

Storage Conditions: Store at 5°C-25°C (avoid extreme high or low tempera-tures)
Shelf Life: 12-18 months

Key Technical Specifications  Production Standard :JC936-2004

(This product manual is for reference only. The specific performance shall be subject to the actual test report.)For MSDS (lMaterial Safety Data Sheet) or customized technical solutions, please contact our technical personnel.