Odorless, Eco-Friendly, Mildew-Proof Beauty Edge Sealant

Product Introduction

Aofeng DA Odorles Eco-fhiendy Mildew-Proof Beauty Edge Sealant is specialy developed for high-humidity envronments like kitchens and bathrooms,Certified with thenational Clas 0 mildew resistance, it ensures long-term mildew protection while offering food-grade safety and decorative aesthetics, making it the ideal choice for high-endresidences, hotels, and medical buildings.

Main components
Polysiloxane,Fillers,Crosslinking Agent,Catalyst,Adhesion Promoter,Other Additives

Product Features
Class 0 Mildew Resistance:
Meets the highest mildew resistance grade (Class 0) as specified in GB/T 1741standard.
Formaldehyde-Free & Heavy Metal-Free.

Odorless Formula:

VOC content < 0.5 g/L (far below the national standard of 50 g/L).

Long Service Life:
Passes accelerated aging tests without cracking or chalking.

Colorfastness:
Premium products resist fading for lasting aesthetics.

Non-Shrinking & Crack-Free:
Maintains dimensional stability after curing to prevent sealing failure.

Applications
Kitchen & Bathroom Spaces:
Suitable for installation and waterproof/mildew-proof sealing of various kitchenutensils and sanitary wares.
Indoor Decoration:
Installation and sealing of doors, windows, and glass.
Outdoor Projects:

Caulking and sealing of glass, marble, aluminum panels, and other interiormaterials in outdoor applications.
Other Applications:
Widely used in automotive, shipbuilding, packaging advertising, home decoration,and many other felds.

Usage Guide
1.Shielding Protection:

Use masking tape to cover both sides of the joint to prevent adhesive fromcontaminating non-bonding areas(remove after curing).

2.Adhesive Tube Opening and Loading:

① Cut the nozzle of the adhesive tube at a 45° angle, adjusting the apertureaccording to the joint width (typically 1/2 of the joint width).

② Load into the caulking gun and expel the unevenly mixed adhesive at thefront end (approximately 5-10 cm).
3.Gluing Techniques:

① Continuous Gluing: Move the caulking gun at a uniform speed toensure the adhesive strip is full without breakpoints.

② Filling Depth: The joint filling should be ≥75% (full filling required forstructural bonding),with an adhesive thickness of 6-12 mm recom-mended.

③ Cross-Section Shape: Adopt a "triangular" or "concave" cross-section(avoid flat surfaces) to facilitate stress dispersion.

4.Trimming and Compaction:
① Use a scraper dipped in soapy water to level the adhesive surface,remove air bubbles, and compact the adhesive (improving density).

②Remove the masking tape immediately after trimming (to avoidadhesion after the adhesive is semi-cured).
Packaging & Storage
Packaging Specifications: 300ml per bottle、590ml per cartridge Customization supported

Storage Conditions: Store at 5°C-25°C (avoid extreme high or low tempera-tures)
Shelf Life: 12-18 months

Key Technical Specifications  Production Standard :JC936-2004

(This product manual is for reference only. The specific performance shall be subject to the actual test report.)For MSDS (lMaterial Safety Data Sheet) or customized technical solutions, please contact our technical personnel.