Premium Acidic Fast-Curing Silicone Sealant

Product Introduction

AF-7135 is a high-performance sicone seaant utilzing advanced acidic curing technology,specificaly designed for profesional aplications requiring rapid curing. With itsexceptional adhesive properties and fastcuring characteristics,it serves as the ideal choice for architectural decoration, pipeline seaing, and industial manufacturing sectors.

Main components
Polysiloxane,Fillers,Crosslinking Agent,Catalyst,Adhesion Promoter,Other Additives

Product Features
Fast Curing:

Short surface dry time and rapid deep-layer curing,

Strong Adhesion:

Exceptional bonding to non-metallic materials.

Elasticity & Durability:
High resistance to displacement and excellent weatherability.

High Transparency:
Virtually invisible after curing,ideal for glass crafts and mirror installationsrequiring aesthetic precision.

Applications
Glass Installation:
Bonding joints for large glass fish tanks, acrylic aquarium splicing.

Mirror Fixing:

Adhesion for bathroom mirrors and decorative mirrors.

Ceramic/Stone Splicing:

Filling joints for washbasins and ceramic tiles(substrate compatibility to beconfirmed).

Usage Guide
1.Shielding Protection:

Use masking tape to cover both sides of the joint to prevent adhesive fromcontaminating non-bonding areas(remove after curing).

2.Adhesive Tube Opening and Loading:

① Cut the nozzle of the adhesive tube at a 45° angle, adjusting the apertureaccording to the joint width (typically 1/2 of the joint width).

② Load into the caulking gun and expel the unevenly mixed adhesive at thefront end (approximately 5-10 cm).
3.Gluing Techniques:

① Continuous Gluing: Move the caulking gun at a uniform speed toensure the adhesive strip is full without breakpoints.

② Filling Depth: The joint filling should be ≥75% (full filling required forstructural bonding),with an adhesive thickness of 6-12 mm recom-mended.

③ Cross-Section Shape: Adopt a "triangular" or "concave" cross-section(avoid flat surfaces) to facilitate stress dispersion.

4.Trimming and Compaction:
① Use a scraper dipped in soapy water to level the adhesive surface,remove air bubbles, and compact the adhesive (improving density).

②Remove the masking tape immediately after trimming (to avoidadhesion after the adhesive is semi-cured).
Packaging & Storage
Packaging Specifications: 300ml per bottle、590ml per cartridge Customization supported

Storage Conditions: Store at 5°C-25°C (avoid extreme high or low tempera-tures)
Shelf Life: 12-18 months

Key Technical Specifications  Production Standard :JC936-2004

(This product manual is for reference only. The specific performance shall be subject to the actual test report.)For MSDS (lMaterial Safety Data Sheet) or customized technical solutions, please contact our technical personnel.